Please wait

Feedback

  Fields in red are required!

Regional Coastal Monitoring Programmes

´╗┐You must be logged in to use the dashboard.

If you are already registered with CCO, use your normal email/password to login; alternatively you can register now to use the system (opens new window).

« Return to map for other wave, tide and met stations.

- Note that these are real-time data and are not quality-controlled.

Arun Platform

  

Additional Information

 Platform location  50° 46.200' N  000° 29.500' W

 

The met station was deployed on 28 May 2008.  The tide gauge became operational in April 2008.

The met station and tide gauge were replaced with new equipment in September 2014.

02/11/2017 Scheduled service
07/04/2017 An offset to the data has occured. The site has been relevelled and will be updated in due course. 
05/04/2017 Scheduled service
21/09/2016 New instrumentation has been installed; met data are correct from pm today.  The data are rather noisy and work is underway to correct this
18/08/2016 The platform was visited today to inspect the site and service the met station. New tide gauges will be installed in the near future.
02/08/2016 The platform has now been refurbished so a service of the equipment can now be carried out at the earliest opportunity.
27/01/2016  
At midnight last night the data stream suddenly became erratic. Once temporary repair works have been completed on the platform a service will be carried out to investigate.
29/06/2015 Data stream is now coming from the new pressure transducer
25/06/2015 Platform visited today to install new pressure transducer and mounting system and replacement solar pannel. Data stream will return to pressure transducer readings soon.
18/06/2015 The data feed to the website is now coming from the replacement radar sensor installed on 13/05/15 until the pressure transducer can be replaced.
16/06/2015 Due to continuously erroneous tide data - uploading to the website has now been stopped.
26/05/2015 Suspected damage to the pressure transducer/cabling is causing erroneous readings. The platform will be visited to rectify the issue as soon as possible.
13/05/2015 A temporary installation of a pressure transducer has been installed on the site today to provide tide readings while the radar level sensor manufacturers continue fault finding with a replacement radar also installed today.
21/04/2015 Data from the platform has been inconsistent over the past few days due to ongoing issues with GPRS reception in the area. The network provider has been contacted.
30/01/2015 Tide data is becoming spiky during periods of increased wave height. This is being looked into and addressed by the manufacturers as a matter of some urgency.
22/01/2015 The platform was visited today to fix data issues. Data is now being collected but not uploaded currently due to a manufacturers fault which should be rectified shortly.
20/09/2014 The new instrumentation has now been installed.
29/04/2014 The weather station has also now been removed in preperation for the installation of replacement sensors in the near future.
19/02/2014 The tide gauge has now been removed and is being assessed for repair. The navigation light has been re-installed.
11/01/2014 Site investigated regarding navigation light and system problems.
31/12/2013 There is a problem at the Platform but at present sea conditions are unsuitable for a service visit.
21/08/2013 Scheduled service
17/01/2013 Scheduled service
20/10/2011 Scheduled service.  The met station has been replaced.
26/10/2010 There is a problem with the power/telemetry system on the Platform, which requires a site visit once sea conditions permit.
08/07/2010 Met data is no longer being transmitted from the Platform. The fault, which appears to be a power problem, is under investigation.  Data from the tide gauge is being transmitted properly.
16/03/2010 Schedule service and additional clean.
09/06/2009 Scheduled service, cleaned platform, checked battery voltages and connected met station to Satel.
14/01/2009 The met station was serviced and is serviceable temporarily, although following vandalism at the site late last year, part of the instrumentation will require re-wiring.

    

  

Edit information